Board Scale "PANEL-SCALE Mark 3"

Datenblatt: Weighing with load cells | PDF (128 KB)

Material savings are achieved through accurate panel weight control

Too-high panel weight is result of too-high material input. Too-low panel weight will reduce panel quality.

EWS supplies robust weighing systems of high accuracy. The data will be shown on digital display or on PC monitor.

PANEL-SCALE also will automatically evaluate the board density by incorporating the data from the thickness gauge THICK-SCAN.

Load cell

Technical Data

Weight per load cell:	max. 1.000 kg to 5.000 kg
Number of cells:	up to 8 (typical 4)
Accuracy:	+/-0.1% of range
Ambient temperature:	-30°C to +80°C (optional: 110°C)
Protection category:	IP68

Optional

Interface to thickness gauge
ATEX22
Various Interfaces as ProfiBus, RS485, RS422, RS232., Device Net

Remote Control
Technical assistance is available by “EWS-Online Support”.

Note

Alternative a continuous non-contact board scale CONTI-SCALE is available. This system also shows the weight distribution lengthwise and crosswise the production. This modern solution requires a gap of only 300mm in the conveying system.